Cleveland Zipcore XL Custom Irons

A great-looking set packed with performance? That’s what makes the new ZipCore XL Irons some of our most exciting yet. Distance-focused, forgiving long Irons pair with precise short Irons so you get power where you need it and control where you want it, all from a single set.

GO FAR, GET CLOSE

Go big and get it close? Yes, please. With all-new ZipCore XL Irons, you get both. AI-designed MainFrame faces and weighting, along with our legendary ZipCore technology, combine to deliver all of the power, control, and confidence you need to hit it far and stick it close without fail. Oh, and did we mention they look darn good while doing it? Sheesh! Just look at those things.

TECHNOLOGY

MAINFRAME

Designed with the help of AI, MainFrame uses a variable network of grooves, channels, and cavities milled into the backside of the club face on ZipCore XL’s 4i7i. This pattern helps maximize flex at impact for better COR. MainFrame also uses weight pads to position mass low and deep, boosting MOl and optimizing the Center of Gravity for more forgiveness.

ZIPCORE

In 8iSW lofts, ZipCore replaces heavy steel in the hosel and heel with an extremely lightweight yet strong, vibration dampening material. This sets the Center of Gravity right where you strike the ball, giving you more consistent launch, spin, and distance. Coupled with our XL Head Design, ZipCore delivers an abundance of high/low and heel/toe MOl for increased forgiveness, feel, and control.

XL HEAD DESIGN

Our XL Head Design features a large, cavity back profile with enhanced shaping and weighting throughout the entire lineup. Thanks to the additional weight savings from ZipCore and MainFrame, we reallocated this weight to the perimeter of the clubhead, upping the MOl for incredible forgiveness.

HYDRAZIP

ZipCore XL Irons feature HydraZip, along with loft-specific grooves, to balance spin performance on every club throughout the lineup.

In 4i7i lofts, HydraZip uses a rougher face blast, with wider, flatter grooves, to help reduce unwanted spin that can eat away at your carry distances. Then, 8iSW lofts receive a slightly smoother blast, but with thinner, deeper grooves to boost spin on approach. Wedge lofts also receive laser milling for superb short-game control and better performance in wet conditions.

V-SHAPED SOLE

With an elevated leading edge, our V-Shaped Sole helps these Irons glide through the turf without dragging like a typical flat sole would, which helps you maintain all that power you generated throughout your swing. A lower trailing edge on the back end still preserves some workability for shaping shots.

ACTION MASS CB

Action Mass CB places an 8-gram counterweight in the end of the shaft near the very top of your grip. The feel of added weight in your hands helps the club seem lighter, promoting a more stable, controlled backswing. It also helps promote a more inside swing path, squarer club face through impact, and, ultimately, straighter shots.

Cleveland Zipcore XL Custom Iron Product Specs

Note: This is for your reference only and does not denote the content of the product.

Shaft Specs

KBS TOUR LITE – SHAFT

The KBS Tour Lite shaft helps both HALO XL Full-Face and ZipCore XL Irons deliver a strong launch, increased spin, and controlled landing. This mid-weight shaft promotes an easy swing tempo with a satisfying follow-through feel, helping you take full advantage of each Iron’s distance-boosting technologies.

UST HELIUM NANOCORE 60 – SHAFT

Helium Nanocore is a high-spin, high-launch golf shaft from UST Mamiya designed using Nanocore technology for increased clubhead speed. It’s lightweight materials and design profile work in harmony with HALO XL Full-Face and ZipCore XL Irons’ performance characteristics to promote better consistency with precise feel.

Grip Specs

LAMKIN CROSSLINE 360 – Grip

Tour proven performance, classic looks, and excellent feel. Crossline features a highly durable compound and best-in-class torsion control for improved shotmaking and confidence.

Cleveland Zipcore XL Custom Iron Shafts

Aerotech

AEROTECH STEELFIBER i110 (EXOTIC)a nice option for the player looking for the smooth and consistent feel of graphite with a ball flight similar to a steel shaft.

AEROTECH STEELFIBER i70 (EXOTIC)is offered in a wide range of flexes and can hold up to even the most demanding swings.

AEROTECH STEELFIBER i80 (EXOTIC)A steel hoop wind incorporated in the shaft increases the dimensional stability during the swing. The high modulus graphite core for increased club head speed and an advanced steel fiber surface layer for stability help redefine golf shaft construction.

AEROTECH STEELFIBER i95is the perfect transition into a lighter weight shaft which allows a player to see some good improvement in distance and vibration reduction while maintaining pinpoint accuracy and incredibly consistent distance control.

AEROTECH STEELFIBER fc90has combined their SteelFiber composite material with a variable stiffness in the tip area.

KBS

KBS 560 (Junior Shafts)has changed the direction and progression of younger developing players and their needs

KBS C-TAPER 95is a lightweight high launch, high spin performance golf shaft. They focus on maximizing the performance by providing the most technologically advanced steel golf shafts.

KBS C-TAPERis designed for players requiring a low piercing trajectory and superior shot control. It maximises energy transfer, for a crisp feel, while optimising shaft diameters in the taper and tip areas for low trajectory and spin control.

KBS C-TAPER LITEFeaturing a constant taper design and proportionate increase in wall thickness. It optimizes energy transfer for maximum distance.

KBS S TAPER CHROME (EXOTIC)featuring a 360 degree cured decal for lasting durability. Shares the same bend profile as the KBS Tour shafts only with elongated step patterns to control spin, generating stable performance throughout the swing.

KBS MAX is designed for players looking for maximum steel like play-ability, shot control and performance in a graphite shaft, developed from optimized weight and stiffness.

KBS TGI is designed for players looking for maximum steel like play-ability, shot control and performance in a graphite shaft, developed from optimized weight and stiffness.

KBS TOURprogressive weight steel shafts are engineered with moment of inertia analysis to increase stability. With a mid/high flex point, these shafts generate a penetrating ball flight and low to mid spin. The higher balance point produces lower swing weights.

KBS TOUR 90is designed for players seeking higher trajectory, additional spin, and maximum distance. It is 20 % lighter than standard shafts which ultimately assists in increasing swing and balt speeds.

KBS TOUR 105a slightly lighter weight shaft, all while providing precision distance and control in a shaft that players have grown accustomed to with the KBS Golf Shafts..

KBS TOUR FLT (EXOTIC)shafts maximize energy transfer for increased shot control. Offer a smooth, responsive feel and are the preferred model by many of the best golfers in the world.

KBS Tour Liteis designed for players seeking tight dispersion, higher trajectory, additional spin, precision control and maximum distance. Combines unique KBS technology with modern lightweight materials to produce maximum energy transfer while maintaining precise shot control.

KBS TOUR V (EXOTIC)is a lightweight product that features larger outer diameters, resulting in a stable tip section and tight shot dispersion. For players that prefer a lighter weight shaft and less ball spin, the KBS TOUR-V is the ideal shaft option.

Mitsubishi

MITSUBISHI MMTutilizes a patent pending Metal Mesh Technology (MMT) to redefine the possibilities for feel and performance in a composite iron shaft.

Nippon

NS PRO MODUS3 105lighter weight to increase club head speed for longer distances, straighter shots, stronger trajectory, more consistent performance!

NS PRO MODUS3 120Provides Desired Trajectory as a result of the unique structure of a stiff tip section and softer mid section.

NS PRO MODUS3 125 (EXOTIC)was the most popular N.S. PRO MODUS Prototype on the Japan Golf Tour Organization. Known initially as System3, the N.S. PRO MODUS Tour 125 is the first of several prototypes Nippon Shaft developed in the System group.

NS PRO MODUS3 130 (EXOTIC)Designed for professionals and advanced amateurs, the new MODUS steel iron shaft series was developed in response to the specific requests of PGA Tour professionals.

Project X

PROJECT X Cypheran ultralight, low resin graphite iron and wood shaft family that focuses on promoting higher launch and maximizing distances.

PROJECT Xstandard shaft remains one of the most popular iron and wedge shafts on the market. Stronger players looking to increase control and stability in their irons gravitate toward the Project X offering.

Project X IOincreases in flex, it gets 5g heavier and is geometrically modified to launch lowerproviding an individually optimized shaft for each flex.

Project X LSis the next evolution of the original Project X. It features an ultra-stable and stiff design that minimizes spin while providing a tight feel to keep up with even the strongest swingers on Tour.

PROJECT X LZfeatures proprietary Loading Zone Technology which produces maximum shaft load during the downswing for 7% greater energy transfer to the ball at impact for more distance.

True Temper

TT DYNAMIC GOLDThis high-flex, tour-weight steel golf shaft is designed for skilled players seeking a low, penetrating ball flight for optimum control and accuracy. It uses Variable Wall Technology and a tour-proven step pattern to provide exceptional performance for serious golfers.

TT DYNAMIC GOLD 105creating a tour-caliber shaft in a premier lightweight design, provides players with the exact same feel as Dynamic Gold in a mid-low launch and spin shaft that is engineered to be easier to swing.

TT DYNAMIC GOLD 120a lighter weight steel shaft. Stronger players will experience a similar profile and launch as Dynamic Gold in a shaft that is easier to swing.

TT Dynamic Gold Mid 115designed to complement modern day equipment by utilizing a unique shaft geometry to create a stiffer mid-section with an active tip section to promote an increase in launch and spin when compared to other Dynamic Gold offerings in similar weight categories.

TT DYNAMIC GOLD TOUR ISSUEprovide the same power, control and the trademark penetrating ball flight associated with the entire series of Dynamic Gold irons shafts. The Tour Issue steel shafts have a Tour Only weight tolerance for custom precision fitting.

TT DYNAMIC GOLD XP90series iron shafts are designed to deliver explosive power and distance to every iron in the bag.

UST

UST RECOIL 95It introduces a new design strategy to graphite irons which optimizes shaft ovaling under swing load. Designed for players seeking a light weight shaft with control and a mid-high ball flight.

UST RECOIL DARThas been designed after years of research, testing and development to precisely optimize shaft hoop stiffness in the critical areas of the golf shaft.

Cleveland Zipcore XL Custom Iron Grips

Golf Pride