Titleist TSR1 Custom Driver

ULTRA-LIGHTWEIGHT SPEED & DISTANCE

Moderate swing speed, meet maximum performance. Titleist TSR1 Drivers incredible lightweight configuration and enhanced aerodynamics make it easier to generate more speed. The new Multi-Plateau Variable Face Thickness design optimizes ball speed across the entire face.

Benefits

• Maximized Launch & Distance
• Exceptional Forgiveness

Features

• Ultra-Lightweight Configuration
• Multi-Plateau Variable Face Thickness Design
• Improved Aerodynamics
• Aerospace Grade Titanium
• SureFit Adjustability

Technology

Ultra-Lightweight Configuration

Every unnecessary gram, from head to grip, has been eliminated from the design of TSR1. It is strategically engineered to be as light as possible while still providing maximum launch and distance dynamics.

Multi-Plateau Face

This new Variable Face Thickness construction approach builds the face inward, layer by layer, to create a large sweet spot across the entire hitting surface. In other words, it produces amazing forgiveness and ball speed from every strike.

Face-Centered CG

The deep center of gravity in TSR1 is almost perfectly centered to the face, an improved position that promotes a higher launch and exceptional ball speed.

SureFit Hosel Adjustability

A driver that fits better performs better. The SureFit system gives a fitter the flexibility to perfectly match the performance of TSR1 to the needs of each individual player, helping you make purer and more consistent contact.

MMT SPEEDMESH Shafts

Playing at under 45g in all flexes, MMT SPEEDMESH offers amazing ultra-lightweight speed, with a focused SPEEDMESH application in the tip for incredible stability and energy transfer at impact. A perfect pairing of minimal weight and high launch to pair with TSR1.

Titleist TSR1 Custom Driver Product Specs

NOTE

This is for your reference only and does not denote the content of the product.

Shafts Specs

MCA MMT SPEEDMESH

Grip Specs

Golf Pride Tour Velvet 360 Lite Gray Flat Cap

Titleist TSR1 Custom Driver Shaft

Aldila

ALD ASCENT Ultralightdeliver an easy, high launch angle without the typical compromises of an ultra-lightweight shaft. Featuring Focused Mass Technology (FMT), a precise weighting section that utilizes heavier, tungsten-infused prepreg in the butt end to help players turn through the ball better for stronger, straighter/drawn ball flight.

ALD Rogue Black 130 MSIoffers unmatched performance and consistency through the use of advanced, extremely high modulus, Graphitic Carbon Fibers that provide performance characteristics never before available in a golf shaft.

ALD Rogue Black 95 MSIcombines advanced graphitic carbon with Aldilas exclusive RIP Technology. This unique combination creates a Rogue shaft design that in the same weight category is lower in torque and provides for a even lower penetrating ball flight.

ALD Rogue Silver 110 MSIis the number one driver shaft on Tour. ROGUE offers unmatched performance and consistency through the use of advanced aerospace materials and design technology. No other golf shaft on the market today utilizes the advanced, extremely high modulus, Graphitic Carbon fibers that provide performance characteristics never before available in a golf shaft.

ALD RIP Alphawas introduced to the golf consumer in 2010. RIP stands for Reverse Inter-laminar Placement. Meaning, some of the bias plies that create torque were moved from the placement near the mandrel to the outside of the shaft walls. The longitudinal plies, that create stiffness were sandwiched between the bias plies.

ALD RIP Phenomproven RIP Technology with unique composite construction to create a new and innovative shaft flex profile for maximum distance and control Hyperbolic Flex Technology. RIP Technology repositions the materials and patterns to optimize the performance characteristics of the shaft.

ALD Voodoo VS7 the high-modulus carbon stabilization rib running the length of the shaft. This innovative rib structure increases hoop strength/stiffness so much that it is 80 percent greater than conventional graphite.

Dumina

Dumina AutoFlexThe new generation of shafts that Dumina claims will make the game of golf easier and more enjoyable for all golfers. By allowing golfers to swing more easily and smoothly with a much lighter shaft, golfers will not only feel fewer aches and pains but that their scores will improve as well.

Fujikura

FUJ TS1 Air SpeederTo lead ‘crushed’ and ‘twist’ in the light shaft bending the balance of strength are best, of the best balance, design from the zero-base shaft configuration.

FUJ Ventus Black VeloCoreTour-inspired profile and the first to include Fujikuras new VeloCore Technology in an accelerated taper, ultra-stiff tip profile.

FUJ Ventus Blue VeloCoreVentus is a Tour-inspired profile and the first to include Fujikuras all-new VeloCore Technology in an accelerated taper, ultra-stiff tip profile.

FUJ Ventus Red VeloCoreA multi-material bias core construction that delivers ultimate stability through transition and impact (maximizing clubhead MOI) increasing velocity and smash factor.

FUJ Ventus TR BlackUltra-stiff tip and handle sections work in unison to support players with Tour-like speeds that prefer the feeling of minimal to no flex during the swing.

FUJ Ventus TR Bluebuilds upon one of the most trusted and best-selling wood shafts in Fujikura history. TR is a new mid launch, low spin profile in the VENTUS line.

FUJ Ventus TR RedThe softest tip section of the TR lineup is ideal for players seeking a mid-high launch profile with controlled spin and increased stability.

FUJ ATMOS TS Blackthe ATMOS Tour Spec line is geared towards the performance golfer looking to keep the ball flighted down with low spin.

FUJ ATMOS TS BlueThe development of ATMOS Tour Spec was an extensive process by which critical player feedback and fitting needs were at the forefront.

FUJ ATMOS TS Redthe ATMOS Tour Spec line is geared towards the performance golfer looking to keep the ball flighted down with low spin.

FUJ SPD 661 EVO VIprovides exceptional speed and stability for longer, straighter shots off the tee and features a low-mid launch/spin that fits perfectly between Evo IV and Evo V.

FUJ SPD 757 EVO VIcontinues the cadence of high-performance, premium shafts golfers have come to expect from the Speeder Evolution series.

FUJ Spdr Pro TSFor the golfer seeking maximum distance, our Speeder PRO Tour Spec offers a higher balance point with tour spec weights and torque numbers.

FUJ Spdr TR 569 (EX)is designed based on the request of Tour professionals for a specific feel and maximum performance.

FUJ Spdr TR 661 (EX)We created an entirely new EI profile by stiffening the mid-section of the shaft and providing the proper bending on Butt and Tip side. The result is a very stable, mid-low launch and low spin shaft that produces exceptional ball speed.

FUJ Spdr TR 757 (EX)New multi-plied hoop layers and 90-ton carbon fiber provide better stability and clubhead speed.

FUJ Motore Speeder VC 6.1With efficient energy transfer and enhanced structural stability from 7-Axis Technology, the Motore Speeder allows you to swing fast with confidence.

FUJ Motore Speeder VC 6.2uniform reinforcement provided by our Quadra Axis Composite and Triax woven material helps you return the head more consistently to impact.

FUJ Motore Speeder VC 8.2 TR SPThis translates into longer and straighter drives. Thats why the Speeder brand has won more events than any other shaft in Tour history.

FUJ Rombax Type Xfeatures Vectran in combination with Kevlar Triax. Vectran fibers suppress the immediate vibration of a shaft more efficiently. Kevlar Triax reduces ovaling and stabilizes the head at impact.

FUJ Spdr 569 Evolution VTechnologies that carry over from previous Evolution shafts include MCT (Metal Composite Technology), 90 Ton Carbon Fiber for ultra-lightweight stability and Maximum Carbon Fiber Content (MCFC) pre-preg material.

Graphite Design

GD Tour AD BB5features the same high quality materials and Japan manufacturing as all the Tour AD models. In the BB5, this combines to deliver a higher launch with mid spin and great feel in a mid-50 gram package.

GD Tour AD DI-6 Black – Stiff is our first shaft design that was integrated with Toray Companys original NANOALLOY material technology in the tip section of the shaft.

GD Tour AD GPare unique and designed for a player that is looking for a light weight shaft with a soft tip to butt profile that will help launch the ball higher. The Tour AD GP-5s, 6s, 7s and 8s are designed with a very stiff tip and stiffer mid to butt section to promote a mid-launch condition and low spin.

GD Tour AD IZ (EX)introduces the latest in the Tour AD premium line of golf shafts, the Graphite Design Tour AD IZ Into the Zone . Designed and manufactured at the Graphite Design Japan factory headquarters, the new Tour AD IZ wood shaft has a very stealthy look to it in black with white/orange accents and a sleek new matte finish.

GD Tour AD MJdesigned and manufactured at the Graphite Design Japan factory headquarters, is available in 50g R2, R1 and S flex, 60g SR, S and X flex, 70g S and X flex and 80g S and X flex. The Tour AD MJ utilizes premium, aerospace quality 50t carbon-fiber materials to provide the best performing shaft available.

GD Tour AD TPutilizes premium, aerospace quality 50t carbon-fiber materials in order to deliver the best feeling and performing shaft available to golfers.

GD Tour AD XCshaft profile is softer in the butt section, stiff in the center section and has a stiff tip to promote low/mid launch angle and low spin with the ball.

GD Tour AD HDseries is a shaft that maximizes the head performance of the large, high moment of inertia, which is the mainstream of wood today.

GD Tour AD VR (EX)With 29 years of designing and manufacturing premium graphite golf shafts, Graphite Design shafts can be seen in play by the best professional and amateur players worldwide.

GD Tour AD CQfeatures the new Nitta 2G-Namd carbon-fiber material technology in the butt section of the shaft and has a bend profile of firm in the handle section, firm in the center section and a medium+ tip section to promote mid-high launch angles and mid ball spin rates.

Mitsubishi

MIT MMT SPEEDMESH achieve ultra-lightweight performance with one member of the family sub 40 grams through the use of a new Metal Mesh Technology that is 75% lighter and thinner than original Metal Mesh.

MIT Kuro Kage Black DC 5G SFWThe 5th generation offers a slightly tighter profile in overall stiffness with lower torque to deliver less spin that its predessor. SFW helps golfers square the clubface through impact, thus creating straighter shots.

MIT Kuro Kage Black DC 5G 55Features the same mid/high launch profile its predecessor, the KURO KAGE Black TiNi, but now features Dual-Core Titanium Nickel (TiNi) Wire, delivering more power, stability and control.

MIT Tensei AV RAW Blue SFWrefines the player-revered performance of Tensei AV Blue and establishes a fill range of fitting options. All three feature a RAW finish that reveals the Aluminum Vapor ( AV ) Coated weave in the butt section, a visible cue of the added stability this unique weave provides.

MIT Tensei AV RAW Whitefeature a RAW finish that reveals the Aluminum Vapor (AV) Coated Weave in the butt section, a visible cue of the added stability this unique weave provides.